Configuring turrets for recording

Owned by Kiss, Mate
May 24, 2022
1 min read

The configuration consists of defining recording mixes, assigning mixes to recording profile and assigning recorder profile to users. 

Recording mix defines which audio sources are added to a recording channel


Step 1 - Create/modify recording mixes (Enterprise\Voice Recording\Recording Mixes)



Step 2 - Create/modify recording profile. Assign previously created mixes  (Enterprise\Voice Recording\Recording Profiles)



Step 3 - If 2N recording is desired, define duplication for the relevant mixes in the profile. The duplicated channels will go to the secondary recorder as well



Step 4 - Assign recording profile to the users (System Designer/End User Configuration)


For each recorded user select the appropriate recording profile.

Step 5 - Set the Recording protocol to IP and save the configuration

 

 Please note this is a device specific setting and so on right top corner the device type should be selected