Desktop Agent HTTP API

Accessing the Developer Mode

After Enabling the HTTP API Developer Mode use your web browser to visit the Developer Mode page

http://<host>:<apiport>/dev/

Where

<host> is the address of the PC where Verba Desktop is installed
<apiport> is the TCP port of the HTTP API (default HTTP API port: 10100, can be changed using the HttpApiPort parameter)

The following page opens:

verba-desktop-http-api.png

The screen has three parts:

API response block - on the top it shows the last API call and its output
Command block - on the left it shows the available API call as links or HTTP GET forms
Status block - on the right it provides status information

The Command block shows all the available HTTP API calls in the following groups:

Recording mode
Screen recording control
Markers

For further information about the commands, please refer to the respective API call topics.

API calls can be executed from this screen:

All API calls that have no extra parameters are directly clickable web links.
All API calls with parameters have a 'Send' button that you can click after filling in the parameter fields

All execution results in an HTTP GET similar to the HTTP GET expected by the main HTTP API.

There is a difference between Main HTTP API and Developer Mode HTTP API URLs.
The URLs of the Main HTTP API are available even if Developer Mode is enabled.
You can derive the Main HTTP API URLs by removing the '/dev/' from the URLs you see when using the Developer Mode webpage.

Enabling and disabling the developer mode

To turn on the HTTP API do the followings:

Step 1 - Open the Registry Editor (regedit)

Step 2 - Set [HKEY_LOCAL_MACHINE\SOFTWARE\Verba\ScreenCap\HttpAPIDeveloperMode]

Values: to enable set to 1, to disable set to 0

Step 3 - Open the Windows Services console

Step 4 - Restart the Verba Screen Capturing Service