Configuring IP-based Radio Recording
Verba can record several radio dispatch centers or radio gateways which are capable of sending a copy of the radio channels in RTP format to the Verba Recording Server over IP. The recording was tested with the following solutions:
- Bosch Telex IP-223
- Motorola / TwistedPair WAVE
- Avtec Scout
Configuring Verba for IP-based Radio Recording
Once the RTP ports are configured on the radio dispatch / gateway side, the Verba Analogue and Radio Recorder Service (Verba General Media Recorder Service in the older versions of Verba) has to be configured:
Step 1 - Create a new recordingchannels.xml file in the C:\Program Files\Verba\setting folder. You can download the sample from here.
Step 2 - To configure the channels for recording, add the lines to the recordingchannels.xml file according to the configuration on the radio dispatch / gateway side.
Attribute | Description |
---|---|
Channel | |
type | The type of the channel. The options are "telex_roip" or "voip". |
id | Unique ID for the channel. Can be anything. |
eid | The Verba tenant environment ID for the channel. Required only in the case of multi-tenant Verba deployment. |
Caller / Called | |
id | The ID of the caller / called. This filed will populate the "From" or "To" (phone number) fields of the record. |
name | The name of the caller / called. This filed will populate the "From Info" or "To Info" fields of the record. |
multicast | The multicast IP address of the recorder. Required only in the case of multicast listening. |
port | The incoming port for the channel. In the case of single-channel RTP recording, the caller and called ports are the same. |
codec | The codec of the incoming RTP stream. The options are "G726_32", "VOX" or "DVI4". Required only in the case of Bosch Telex recording. |
Step 3Â - Fill in the properties of the channels and save the file.
Step 4 - Log in to Verba and go to the System \ Servers, select your server, click on the Service Activation Tab, and activate the Verba Analogue and Radio Recorder Service by clicking on the  icon.
Spet 5 - After activating the service click on the Change Configuration Settings Tab and scroll to the service's node and configure the incoming port range according to the configuration in the recordingchannels.xml file:
Step 6 - Save the changes by clicking on the  icon.
Step 7 - A notification banner will appear on the top. Click on the click here link, so you will be redirected to the Configuration Tasks tab. Click on the Execute button in order to execute the changes.
Spet 8 - Click on the Service Control tab, and start the Verba Analogue and Radio Recorder Service by clicking on the  icon.