NetApp SnapLock

Available in version 8.1 and later

This page provides a guide to configuring a NetApp SnapLock storage as a Storage Target in Verba.

SnapLock is an alternative to the traditional optical "write once, read many" (WORM) data. SnapLock is used for the storage of read-only WORM data. SnapLock is a license-based, disk-based, open-protocol feature that works with application software to administer non-rewritable storage of data. The primary objective of this Data ONTAP feature is to provide storage-enforced WORM and retention functionality by using open file protocols such as CIFS. SnapLock can be deployed for protecting data in strict regulatory environments in such a way that even the storage administrator is considered an untrusted party. SnapLock provides special purpose volumes in which files can be stored and committed to a nonerasable, non-rewritable state either forever or for a designated retention period. SnapLock allows this retention to be performed at the granularity of individual files through standard open file protocols such as CIFS.

For a general description of Verba Storage targets, please refer to: Storage targets

Please refer to the official NetApp SnapLock guide to deploy and configure the NetApp system.

Verba uses the NetApp Manageability SDK.

Creating a NetApp SnapLock target

Follow the steps below to create a new Verba Storage target for NetApp SnapLock:

Step 1 - Open the Verba Web interface then select Data Management > Storage targets from the top menu.

Step 2 - Click on Add New Storage Target

Step 3 - Fill out the configuration form according to the requirements in the following table.

Configuration itemDescription
NameName your storage target. This name will identify this target across the system.
TypeSelect NetApp SnapLock
PathSpecify the path where the storage is accessible in the Windows file system (UNC path)
Volume PathSpecify the NetApp specific volume path
Host Name or IP AddressName or address of the NetApp storage
PortAccess port of the NetApp storage
API UserUser name of the API user configured for Verba access in NetApp SnapLock
API PasswordPassword of the API user configured for Verba access in NetApp SnapLock

Step 4 - Click Save to save the settings

After this point the Storage target is available for use by other Verba components (e.g. Data management policies).

Configuring SSL certificates for the API connection

NetApp SnapLock can be configured to accept SSL connections from trusted sources only. You can configure the trusted and signed certificates used by the Verba system on the servers directly. If you intend to use multiple NetApp SnapLock systems for Verba, you need to use the same certificates for all, because it is a server side setting in the Verba system. By default Verba uses its own self signed certificates for the SSL connection.

Follow the steps below to configure the certificates.

Step 1 - Copy the X.509 certificate and key files to the Verba server

Step 2 - Navigate to the Configuration / Servers

Step 3 - Click on the Verba server you would like to configure

Step 4 - Click on the Change Configuration Settings tab

Step 5 - Open the Storage Management / Upload Targets / NetApp SnapLock tree on a Verba Recording Server or the Storage Management / Storage Targets / NetApp SnapLock tree on a Verba Media Repository server or on a Verba Media Repository and Recording Server 

Step 6 - Configure a trusted custom X.509 certificate for the connection

Step 7 - Click the Save icon and follow the instructions on the page to apply the configuration on the server

Step 8 - Repeat the steps above on all Verba servers where you move files to NetApp SnapLock

NetApp SnapLock compliance clock

When Verba uploads / moves media files to a NetApp SnapLock storage target, setting the retention period with auto delete it takes the clock drift of SnapLock into account at the point of the file move. If the storage goes down at any time during the retention period (between the upload / move and the date of auto deletion) Verba will not be able to retrieve that information, thus will try to delete the files in question earlier than SnapLock would allow it. As a result, auto deletion by Verba policies might fail.

Using custom credentials for accessing file share

Available in version 8.5 and later

It is possible to use credentials other than the service user for each NetApp SnapLock storage. If you want use custom credetials check the "Use custom credentials for accessing the fiel share" checkbox, then provide the credentials.

Configuring connection protocol and vFiler instance name

Available in version 8.7 and later

By default Verba uses HTTP protcolos for the NetApp connection. If HTTPS connection is required, then the Host Name or IP Address field must be populated in the following format: https://hostname_or_ipaddress.

If the vFiler feature is used, then the instance name have to be specified after the Host Name or IP Address filed after a comma (,) or semicolon (;). Example: hosname;instancename , https://ipaddress,isntancename

Â