Cisco JTAPI Configuration settings

Basics

The following table provides detailed instructions on each configuration setting:

Configuration Parameter Name	Description
Cisco UCM Cluster(s)
Cisco UCM IP Address(es)	Comma (,) separated list of the IP Addresses of the CUCM servers. All CUCM addresses need to be configured where theCTIManager service is enabled. The system will always use the first address, and fail over to the next one in the list if the primaryCTIManager is down. Only a single CUCM cluster can be configured.
JTAPI User Name	The name of the user configured in the CUCM as an Application user.
JTAPI User Password	The password of the user configured in the CUCM as an Application user.

The following table provides detailed instructions on each configuration setting:

Configuration Parameter Name	Description
Cisco UCCX IP Address(es)	List of IP addresses of Cisco UCCX servers. Master and Slave UCCX servers should be listed in the same row separated by commas (,). Independent UCCX servers should be separated by new lines. For more information, see Cisco UCCX Integration.

The following table provides detailed instructions on each configuration setting:

Configuration Parameter Name	Description
Cisco UCCE PG CTI Server IP(s) and port(s)
CTI Server Protocol Version
Peripheral ID

The following table provides detailed instructions on each configuration setting:

Configuration Parameter Name	Description
Genesys T-Server IP(s)
Target Genesys Field for Verba Call ID	Verba will attach the Verba Call ID to this Genesys User Data Field.

The following table provides detailed instructions on each configuration setting:

Configuration Parameter Name	Description
Service Port	Port number for the service.
Work Folder	Work folder path.
Advanced Recording Rules Enabled	When enabled, the service uses a special XML file for recording rules. For more information, see Advanced Call Recording Rules.