Media Repository Local Disk

This page provides a guide to configuring a Verba Media Repository as a Storage Target in Verba.

For a general description of storage targets, please refer to Storage and export targets.

Follow the steps below to create a new Storage target for a Verba Media Repository:

Step 1 - Open the Verba Web interface then select Data Management > Storage targets from the top menu.

Step 2 - Click on Add New Storage Target

Step 3 - Fill in the configuration form according to the requirements in the following table.

Configuration item	Description
Name	Name your storage target. This name will identify this target across the system.
Type	Select Verba Media Repository Local Disk
Path	Specify the path where the storage is accessible in the Windows file system (UNC path)
Host Name or IP Address	Name or address of the Verba Media Repository
Port	Port used to access the Verba Media Repository (default: 20111)

Step 4 - Click Save to save the settings

After this point the Storage target is available for use by other Verba components (e.g. Data retention policies).