CDR and Archived Content Importer settings

General

The following table provides detailed instructions on each configuration setting:

Configuration Parameter Name

Description

Wait Time Between Query Cycles [sec]

If the schedule is set to No Schedule at any of the settings, this setting defines the time interval between the runs.

CDR Import

The following table provides detailed instructions on each configuration setting:

Configuration Parameter Name

Description

Cisco CDR Column Filters

Sets which CDR records should be excluded from the CDR Import. Column names and values can be provided in "column_name:value" format, on at each line. The value is a regex.

Cisco External Device/IP CriteriaDevices to be excluded from the Cisco CDR Reconciliation can be provided in this setting with a regex, so they won't be recognized as a recorded party, even if their extension is added as recorded in the Verba extension list.
Import ScheduleSets the schedule of the CDR Import. The configuration can be changed by clicking on the icon, then following the wizard in the right panel.
Wait Time for Recorder's CDR [sec]The CDR Reconciliation won't check the calls which are not older than the time specified in this setting.
Recheck ScheduleSets the schedule of the CDR Import Recheck. The configuration can be changed by clicking on the icon, then following the wizard in the right panel.
Number of Days to Recheck Imported RecordsSet the number of days to recheck in case of CDR Import Recheck.

Archive Import

The following table provides detailed instructions on each configuration setting:

Configuration Parameter Name

Description

Import Schedule

Sets the schedule of the Archive Import. The configuration can be changed by clicking on the icon, then following the wizard in the right panel.

Import Query Wait Time [sec]The Archive importing won't check the calls which are not older than the time specified in this setting.