Available in version 8.4 and later

This page provides a guide to configuring an External Verba Media Repository as a Storage Target in Verba. The External Verba Media Repository storage target should be used only when the target Media Repository server belongs to a separate Verba system (with separate database)! If the target Media Repository is in the same system as the

Network Storage, the storage target should be used.

For a general description of storage targets, please refer to Storage and export targets.

Follow the steps below to create a new Storage target for an External Verba Media Repository:

Step 1 - Open the Verba Web interface then select Data > Storage targets from the top menu.

Step 2 - Click on Add New Storage Target

Step 3 - Fill in the configuration form according to the requirements in the following table.

Configuration item	Description
Name	Name your storage target. This name will identify this target across the system.
Type	Select External Verba Media Repository
Host Name or IP Address	Name or address of the External Verba Media Repository
Port	Port used to access the External Verba Media Repository (default: 20111)

Step 4 - Click Save to save the settings

Browser not supported