The Verba Unified Recorder service should be enabled and configured for IPC Unigy recording as follows.
| Table of Contents |
|---|
...
Activate the Unified Call Recorder service on the Recording Servers
Step 1 - In the Verba Web Interface go to System \ Servers
...
Step 5 - Repeat the steps on all Recording Servers (all servers with either a Media Recorder or Recording Director role or both) if there are multiple
Configure the Recording Director
Step 1 - In the Verba Web Interface go to System \ Servers
...
Step 3 - Click on the Change Configuration Settings tab and navigate to Unified Call Recorder / Recording Providers / IPC Unigy
Configure Unigy Zones
Step 4 - Add a new zone with the 
icon under Unigy Zones. On the right panel, configure the zone configuration settings as described below:
Name | Description | ||
|---|---|---|---|
| Zone VIP CTI URL | Enter the URL of the Unigy CTI service. It should be like http://zone_vip/ctisvc/recording/CSTAService where the host part must identify the Zone VIP. If secure communication is required the URL should be https://.... If HTTPS is configured recorder establishes recording channels via SIP over TLS as well.
| ||
| Local CTI port | This is a The port on which Verba listens to CTI events from Unigy after subscription on to these. If not configured, a random free port is selected in the range 1024-65535 is randomly selected. If for firewall reasons this should be a specific port then it can be configured. The port must be unique for each zone and IPC Zone, and it must be free (ie other applications should not use it).not in use by other applications). The recommended setting is to explicitly set these ports, starting from 6001. | ||
Local SIP port | The port on which Verba listens to SIP requests from Unigy that are related to media mixes. If not configured, a free port in the range 1024-65535 is randomly selected. If for firewall reasons this should be a specific port then it can be configured. The port must be unique for each IPC Zone, and it must be free (not in use by other applications). The recommended setting is to explicitly set these ports, starting from 5062. | ||
| CCM SIP port | If for some reason Unigy does not use the standard/default 5060/5061 ports, then the SIP port number should must be configured here. | ||
| Secondary Recorder (2N) | If 2N recording is required then one Recording Director should have the primary role, and the other Recording Director the secondary role. If it is enabled, the Recording Director will subscribe to "duplicate" mixes defined in the recording profile. |
Configure certificate
Step 5 - Configure the certificate settings if secure communication is used in zone configuration:
Name | Description |
|---|---|
| SSL/TLS Certificate | Specify the certificate file/certificate thumbprint (a certificate stored in the Windows Certificate Store or PEM/PFX certificate file path). The certificate must be signed by Unigy. |
| SSL/TLS Key | If a file-based certificate (PEM) is used, the path of the private key file. If it is bundled with the certificate, then the same file should be set here. |
| SSL/TLS Key Password | Specify the password for the file that contains the certificate keys |
| SSL/TLS Trust List | Specify the list of certificates validating Unigy's certificate:
|
Revise optional settings and save the configuration
Step 6 - Review the following optional configuration settings:
Name | Description |
|---|---|
| CDR/Agent Event Subscription Keepalive (seconds) | Thekeepalive timer for the subscription. The lower value detects failure quicker but causes more load on Unigy. |
| Agent State Polling Period (seconds) | The timer for agent state polling, lower value detects failure quicker but causes more load on Unigy. |
| Unigy Controlled Recording | Recording decision from IPC should or not override Verba decision |
...
Step 8 - A notification banner will appear on the top. Click on the click here link, so you will be redirected to the Configuration Tasks tab. Click on the Execute button in order to execute the changes.
Configure the Media Recorder
Besides the general recording specific configuration, there are the following IPC Unigy specific configurations:
...
For more information on voice activity detection and call splitting, see Configuring voice activity detection and call splitting for trader voice recording.
Configure distributed Media Recorder and Recording Director
If it is required, the Media Recorder and the Recording Director can be separated. The following guide contains our requirements and best practices on the subject: Configuring recording high availability
IPC Unigy resilient recording configurations:
Configure 2N recording
Preparation
The following method requires one Recording Server in each lane(or one Recording Director and a Media Recorder, in case of distributed components).
Configure the Recording Director:
Step 1 - In the Verba Web Interface go to System \ Servers
...
Step 8 - A notification banner will appear on the top. Click on the click here link, so you will be redirected to the Configuration Tasks tab. Click on the Execute button in order to execute the changes.
Configure CTI failover (N+1 Recording)
Preparation
For this setup two Recording Directors are required. One should be set as active CTI service, for this server, no additional configuration required, the other should be set as passive. A media stream can only be recorded by one server, the Recording Director decides the recording session based on agent login events \ polling.
| Warning |
|---|
If CTI failover redundancy is configured (standby Recording Director), there must be a very stable network connection between the two hosts. NIC teaming or crossover cable connection is required. If the network is lost between the two servers but both have an active connection to the IPC infrastructure, it could lead to unexpected situations and possible media loss, because both Recording Directors will actively try to control the same media stream. |
Configure the passive Recording Director:
The following settings should be changed on passive Recording Director:
...
Step 4 - Set the following configuration items:
Unified Recorder\Recording Providers\IPC Unigy\Passive CTI Service: Yes
Unified Recorder\Recording Providers\IPC Unigy\Active CTI Service Address: Monitoring address (FQDN, hostname, IP) of active Recording Director. If not the default API port (10031 UDP) is configured it should be specified too in server:port format
...
Step 6 - A notification banner will appear on the top. Click on the click here link, so you will be redirected to the Configuration Tasks tab. Click on the Execute button in order to execute the changes.
Push-To-Talk Recording
Optionally, the recorder can also create CDR/CTI records covering the Push-to-Talk (PTT) session of the owner trader for the period between the press and release of the PTT button. These CDR records share the same media/VOX record as the related open line/speaker channel CDRs.
To enable this feature, configure the following item:
Step 1 - Go to System \ Servers
Step 2 - Select the server that has the Recording Director role
Step 3 - Click on the Change Configuration Settings tab and navigate to Unified Call Recorder / Recording Providers / IPC Unigy
Step 4 - Set the Create CDR Record for PTT Parts parameter to Yes
You can search and filter for the PTT records on the Web Interface and during exports.
- To filter for the PTT records under Conversations/Search, set the IPC Unigy Custom: Session Type metadata field to PTT.
- To filter for the PTT records in a new or existing data management policy, set the IPC Unigy Custom: Session Type conversation detail field under Data Management Filtering Criteria to PTT.