Configure

Configuring your Verba Recording System

Your Verba Recording System comes with an advanced web-based Central Configuration solution that lets you:

• • configure all your server and desktop recorders from a single web interface
  • automatically push the configuration to all local and remote components
  • keep track all configuration changes for auditing purposes

You can access the Central configuration solution with your administrator account under Administration / Verba Servers.

Configuration steps:

Step 1 - Apply the license

The first step has to be done after the installation is applying the license.

How to Install your Verba license

Step 2 - Pull the server specific settings from the server registries

Before being able to configure your Verba system, there are some initial configuration steps.

How to pull the server specific settings after the initial installation

Step 3 - Configure Verba and the UC platform for recording

Different phone system and recording modes require different settings in the Verba Recording System.

Cisco recording

Skype for Business / Lync recording

Avaya recording

IP Trade recording

Speakerbus recording

Other SIP-based recordings (Broadsoft, ACME Packet, CUBE, Polycom RMX, Cisco VCS, Intracom VCOM, Huawei)

Mobile recording (Singtel, Truphone)

Passive recording (Asterisk, Mitel, TIPT, Aastra, Alcatel, others)

Analog recording

Configuring the Verba Dial-in Recorder

The Verba Dial-in Recorder provides rich features including leaving and playback audio/video recordings. For the configuration steps see: Configuring the Verba Dial-in Recorder Service

Configuring Phone-based Silent Monitoring for Skype for Business / Lync or Cisco

Using the Verba Dial-in Recorder, it's also possible to set up phone-based silent monitoring for Skype for Business, or for Cisco without using the Built-in Bridge. For the configurations steps see: Configuring Phone-based Silent Monitoring for Skype for Business / Lync

Configuring the Verba Desktop Agent

The Verba Desktop Agent is required for several features like Agent View, call recording pop-up/control, screen recording, and PCI DSS. For the configuration steps see: Configuring the Verba Desktop Agent

Step 4 - Configuring media file upload

If the Recorder Server is not co-located with the Media Repository or there are multiple Recorder Servers, then the media files have to be uploaded to a single location. For the upload options see Configure media file upload

Step 5 - Configuring extensions

After finalizing the configuration of the recording services, make sure you have added the extensions you want to record to the Verba extension list. This can be done manually (Extension list) or using Active Directory Synchronization.

Step 6 - Check the functionality of your Verba system

There are several steps should be taken in order to verify the system functionality.

Step 7 - Configure backup