...
Parameter | Description | Default value | Modifiable |
|---|---|---|---|
Eid | The Environment ID of the VFC environment for which the Integrator is configured (VFC equivalent of a Tenant ID). | 0000 | Yes, can be modified |
MediaRepositoryDbConnectionString | The connection string to access the VFC Database. The minimum required parameters are supplied as default values, separated by semicolons. | Server=...,1433;Initial Catalog=verba;User Id=...;Password=...;Connect Timeout=15;Encrypt=False;TrustServerCertificate=False;ApplicationIntent=ReadWrite;MultiSubnetFailover=False | Yes, must be modified |
MediaRepositoryServerUrl | The FQDN or NetBIOS name of the Media Repository server to send requests to the VFC. | https://YourVfcMediaRepositoryServer | Yes, must be modified |
AdSyncGroupSeparator | The Group Naming Separator used in VFC as part of the synchronization of Active Directory Organizational Units to VFC Groups. | / | Yes, can be modified |
SupportedPlatformsSupportedVfcDataSources | The platform names and recorded platforms or import sources describing the types of switches switch data sources supported by the Integrator that can be synchronized between VFC and WFE when marking calls and creating data sources. Must not be modified. avaya-dmcc, Phone cisco-network, Phone zoom_phone, Phone zoom_meeting, Application ipc-unigy, Trader ip-trade, Trader | No | |
ConfiguredPlatformsConfiguredVfcDataSources | The list of configured switch types that are synchronized between VFC and WFE when marking calls and creating data sources. The Integrator does not run until at least one of the supported platform names VfcDataSource values listed in SupportedVfcDataSources is added to ConfiguredPlatformsConfiguredVfcDataSources. | example-platformEmpty | Yes, must be modified |
- The Eid must describe the VFC environment the Integrator is configured for. The default environment ID is 0000, so the parameter only needs to be modified if the environment ID of the VFC environment has been configured to be different.
- The MediaRepositoryDbConnectionString is a semicolon-separated string of values that are parsed as the connection details to the VFC database from which the Integrator reads data. The minimum required connection details are supplied as the default value for the MediaRepositoryDbConnectionString parameter, but you must edit this string to fit your deployment requirements.
- The ADSyncGroupSeparator must match the Group Naming - Separator parameter configured in VFC in the Organization Units section of Active Directory Synchronization, under Administration.
- The SupportedPlatforms SupportedVfcDataSources parameter is an internal setting for the Integrator and must not be modified.
Related information
...
- The ConfiguredVfcDataSources parameter requires at least one of the VfcDataSource values listed in SupportedVfcDataSources specified. Do not enter a full SupportedVfcDataSources object.
Related information
Configuring database connection (VFC Deployment Guide)
...
Parameter | Description | Default value | Modifiable | |
|---|---|---|---|---|
WfeDatasource | The name of the WFE data source that is to be created. Must be unique across the WFE installation. | YourWfeDatasourceName | Yes, must be modified | |
VfcServers | The list of the FQDNs or NetBIOS names of VFC recorders whose recorded calls get marked to the configured WFE data source. | Your.Vfc.RecorderServer | Yes, must be modified | |
VfcPlatformVfcDataSourceName | The VFC Platform ID or import source type of the recorded switch platform. Specifies the data source type in WFE. Must be one of the ConfiguredPlatform ConfiguredVfcDataSources values. | example-platform | Yes, must be modified | Timezone | The time zone of the VFC recorded switch platform in the IANA time zone format <area>/<location>. This value is set as
| ImportSourceIDs | The IDs of import sources to synchronize as separate WFE data sources. If not specified, all import sources of the switch type specified in VfcDataSourceName are synchronized as a single WFE data source. | Empty | Can be omitted If included, must be modified | |
Timezone | The time zone of the VFC recorded switch platform in the IANA time zone format <area>/<location>. This value is set as the time zone of the WFE data source in the GMT offset time zone format when created. Refer to the Configuration Guide for the list of supported time zones. | Europe/London | Yes, must be modified | |
Extensions | The list of extensions to associate to the WFE data source. Individual extensions, extension ranges, and a combination of both are supported. Individual extensions can be entered as alphanumeric values, while extension ranges must be integers in the format <startExt>-<endExt>. Optional. | Empty | Can be omitted If included, must be modified |
- The data source name defined by WfeDatasource must be unique per WFE installation.
- The comma-separated list of VFC recorders defined by VfcServers must all be in the same time zone.
- VfcPlatform VfcDataSourceName must be one of the values from the ConfiguredPlatforms ConfiguredVfcDataSources parameter in the WFE section of the appsettings.Production file. The value of this parameter populates the Recorded Platform property of the data source that is created in WFE.
- There must be at least one data source object configured in this section for each platform specified in the ConfiguredPlatforms ConfiguredVfcDataSources setting.
- The ImportSourceIDs parameter is not required if the VfcDataSourceName parameter describes a recorded platform type data source. It can be omitted if the data source is an import source, in which case all VFC data sources with the specified VfcDataSourceName are associated with the same data source in WFE. If included, the parameter is in the format of a comma-separated list of individual import source IDs.
- The Extensions parameter is not required if the VfcDataSourceName parameter describes an import source type data source. It can be omitted if the data source is a recorded platform, in which case all existing extensions are associated with the same data source in WFE. If included, the parameter is in the format of a commaa comma-separated list of individual extensions or extension ranges. Individual extensions are supported in an alphanumeric format, while extension ranges are supported in the integer range format <startExtension>-<endExtension>. In extension ranges, both the startExtension and endExtension values are included as configured for the data source.
- The Timezone value must be specified in the IANA time zone format <area>/<location>. For example, Africa/Windhoek, or America/Los_Angeles.
...